Skip to content
Mortgage ReadyUSA

Debt to Income Ratio for a Mortgage: How It Works and the Limits

Disclosure: Mortgage Ready USA is a free matching and referral service. We are not a lender and not a credit repair organization, and we may be paid by our partners. This page is general education, not a loan offer or a guarantee. Results vary.

Last reviewed

Updated

Your credit score gets most of the attention, but lenders also look closely at how much of your income already goes to debt. That number is your debt-to-income ratio, or DTI. This guide explains how DTI is calculated, walks through an example with made-up round numbers, and summarizes the published limits for conventional (Fannie Mae), FHA, and VA loans. It does not say whether you qualify for any loan.

What is a debt-to-income ratio for a mortgage?

Your debt-to-income ratio is all of your monthly debt payments divided by your gross monthly income, according to the CFPB. For a mortgage, the lender usually includes the new housing payment you are applying for along with your other debts. Different loan programs and lenders set different DTI limits, so the same ratio can fit one loan and not another.

The CFPB's qualified mortgage explainer adds that a lender must consider either your DTI or your residual income, meaning how much income you have left after paying your monthly debts. Either way, the lender is trying to judge whether you can afford the payment alongside everything else you owe.

How do I calculate my debt-to-income ratio?

Add up your monthly debt payments, divide the total by your gross monthly income (income before taxes and deductions), and multiply by 100 to get a percentage. For a mortgage, include the expected new housing payment in the debt total. The result is your total, or back-end, DTI. Some programs also look at the housing payment alone.

In formula form:

  • Total DTI = (new housing payment + other monthly debt payments) ÷ gross monthly income
  • Housing ratio = new housing payment ÷ gross monthly income

Fannie Mae describes the two parts as total monthly obligations, which include the qualifying payment for the new mortgage and other long-term and significant short-term monthly debts, and the total monthly income of all borrowers, to the extent that income is used to qualify. FHA uses two ratios: the total mortgage payment to effective income ratio (PTI) and the total fixed payments to effective income ratio (DTI).

Which debts count, and how income is counted, follows each program's detailed rules. Your lender makes that call for your file, so ask what they include.

What does a DTI calculation look like?

Example only. The numbers below are invented round figures to show the arithmetic. They are not typical incomes, payments, or loan terms, and they are not a quote.

Imagine a borrower with these figures:

Item (example) Monthly amount
Gross monthly income $5,000
Expected new housing payment $1,400
Car loan payment $300
Student loan payment $200
Credit card minimum payment $100
Total monthly debt payments $2,000

Step 1, housing ratio: $1,400 ÷ $5,000 = 0.28, or 28%.

Step 2, total DTI: $2,000 ÷ $5,000 = 0.40, or 40%.

So this example borrower has a 28% housing ratio and a 40% total DTI. You can also work backward. At $5,000 of gross monthly income, a 43% total DTI would allow $2,150 a month in combined debt payments, including housing ($5,000 × 0.43 = $2,150). Again, these are illustration numbers only. Your lender calculates your actual ratios from verified documents.

What is the maximum DTI for a conventional loan?

For Fannie Mae loans underwritten through Desktop Underwriter (DU), the maximum allowable DTI is 50%. For manually underwritten loans, the maximum total DTI is 36% of stable monthly income, and it can go up to 45% if the borrower meets the credit score and reserve requirements in Fannie Mae's Eligibility Matrix. Lenders may set lower limits.

These limits come from Fannie Mae Selling Guide section B3-6-02. In the example above, a 40% total DTI would be over the 36% manual baseline, within the 45% manual maximum only if the score and reserve requirements were met, and under the 50% DU maximum. Being under a published maximum does not mean a loan is approved, because DU and the lender weigh the whole file.

What DTI does FHA allow?

For manually underwritten FHA loans, HUD Handbook 4000.1 sets maximum qualifying ratios of 31% housing and 43% total, written as 31/43, with no compensating factors needed at a decision score of 580 or higher. Borrowers with scores from 500 to 579, or no credit score, may not exceed 31/43. Higher ratios need documented compensating factors.

HUD's manual underwriting matrix, for decision credit scores of 580 and above, looks like this:

Maximum ratios (housing/total) What HUD requires
31/43 No compensating factors required
37/47 One of: verified and documented cash reserves, minimal increase in housing payment, or residual income
40/40 No discretionary debt
40/50 Two of: verified and documented cash reserves, minimal increase in housing payment, significant additional income not reflected in effective income, and/or residual income

The handbook also allows stretch ratios of 33/45 for energy efficient homes that meet its standards. The matrix applies to manual underwriting of the borrower under Handbook 4000.1, Section II.A.5. Many FHA loans are first run through FHA's TOTAL Mortgage Scorecard. HUD's TOTAL overview states that an Accept result means the loan is underwritten under the TOTAL section of Handbook 4000.1 (Section II.A.4), without a manual underwriting review except where a manual downgrade is required. HUD does not publish a single maximum DTI on that TOTAL overview the way the manual matrix does, so the ratios a lender can accept on TOTAL Accept files may differ from 31/43. Ask your lender how TOTAL treated your file, or see HUD's TOTAL Mortgage Scorecard page. Under the example above, 28/40 would sit within 31/43.

What DTI does the VA use?

VA's regulation sets a debt-to-income standard of 41% or less, and VA also uses a residual income guide. Ordinarily a veteran must meet both standards, but failing one does not automatically disqualify the veteran. If the ratio is above 41%, the loan may still be approved with justification, following the steps in the regulation.

These rules come from 38 CFR 36.4340. The residual income figures are described as a guide to use alongside the other underwriting steps. VA also does not set a minimum credit score, though lenders may set their own. Lenders may also apply stricter DTI limits than VA's standard.

Why do DTI limits vary by lender?

Program limits are a ceiling, not a promise. A lender may add its own overlay, such as a lower maximum DTI, on top of Fannie Mae, FHA, or VA rules. The CFPB notes that different loan products and lenders have different DTI limits, so it is worth asking each lender what it accepts before you apply.

Your DTI also works together with the rest of your file. Credit score, reserves, down payment, and the type of underwriting can all change how a given ratio is viewed. That is why two lenders can look at the same DTI and reach different answers.

How can I lower my debt-to-income ratio before applying?

You can lower DTI by reducing monthly debt payments, increasing documented income, or aiming for a smaller housing payment. Paying off or paying down a debt with a monthly payment, avoiding new loans or financed purchases, and choosing a lower purchase price all reduce the ratio. Results vary, and a lower DTI alone does not guarantee approval.

A few practical points:

  • Look at payments, not just balances. DTI is built on monthly payments. Paying off a small loan entirely can remove a whole payment from the calculation, while a partial paydown may not change the required payment.
  • Hold off on new credit. A new car payment or store financing plan adds to your monthly debts right when a lender is measuring them.
  • Know how your income will be counted. Lenders count income they can verify. Ask your lender which income sources they can use for your file.
  • Revisit the purchase price. A smaller loan usually means a smaller housing payment, which lowers both ratios.

Paying down revolving balances can also help your credit score, which matters for the score thresholds on conventional loans and FHA loans.

What else do people ask about debt-to-income ratio for a mortgage?

Is DTI based on gross or net income?

The CFPB defines DTI using gross monthly income, which is income before taxes and other deductions. Fannie Mae refers to stable monthly income and FHA refers to effective income, which follow each program's own counting rules.

Is 43% the maximum DTI for a mortgage?

Not across the board. 43% is the total ratio in FHA's 31/43 manual benchmark, but FHA allows higher ratios with compensating factors. Fannie Mae allows up to 50% through DU, and VA's standard is 41% with room for justified exceptions. Lenders may set lower limits.

Does DTI affect my credit score?

DTI is a lender calculation, not part of your credit report. Your credit score looks at things like payment history and amounts owed, while DTI compares your payments with your income. Paying down debt can affect both.

Is there a DTI calculator on this site?

No. We do not offer a DTI calculator. You can use the formula and example above, and your lender will calculate your ratios from your documents. Our one tool is the credit score loan checker, which looks at credit score rules by loan type.

Can I get a mortgage with a high DTI?

Possibly, depending on the program, the rest of your file, and the lender. FHA's manual matrix allows up to 40/50 with two compensating factors, Fannie Mae allows up to 50% through DU, and VA allows exceptions above 41% with justification. None of these is a guarantee.

Sources

All sources retrieved 5 Nov 2026.